No welding fittings×恵信工業 - List of Manufacturers, Suppliers, Companies and Products

No welding fittings Product List

1～10 item / All 10 items

Displayed results
Completely non-welded fitting 'GT Hook TT Type'

Completely non-welded fitting 'GT Hook TT Type'

Non-welded fittings suitable for reinforcing the fixation of main bars and hoop bars.

The "GT Hook TT Type" is a non-welded fitting for fixing main rebar and hoop rebar. In the GT method, fixing the main rebar and hoop rebar with No. 18 binding wire is sufficient; however, when rolling and moving rebar, the binding wire may break, so please use this as reinforcement. 【Design Strength kN/location (1/location)】 ■ Standards: Main rebar D13 to D51 × Tie rebar (hoop rebar) D13 to D32 ■ Tensile Strength: 70 (7) ■ Allowable Stress: 21 (2.1) ■ Safety Factor (F): F=3 *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely non-welded fitting "GT Hook"

Completely non-welded fitting "GT Hook"

Achieve "no twisting" and "no loosening" without welding! Improve work efficiency! Options available for "hardware only," "hoops only," and "reinforcement frames only"!

The "GT Hook" is a completely weld-free fitting that can improve work efficiency. By using this product, it is possible to connect all rebar and reinforcement frames without rigidly welding them together. The combination of flange-equipped lock nuts and custom wire ensures that there is no loosening, maintaining an accurate shape. 【Features】 ■ Joins rebar without welding ■ Prevents twisting and deformation ■ Maintains accurate shape ■ Allows for the production of fittings suitable for the job site ■ Can be assembled without skilled workers *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely Weldless Fitting 'GT Spacer'

Completely Weldless Fitting 'GT Spacer'

Can be fixed to the main rebar with a U-bolt for use!

The "GT Spacer" is a fitting that improves work efficiency by welding the spacer body and the washer together. It can be used by securing it to the main rebar with a U-bolt. 【Features】 ■ Spacer body and washer are welded together ■ Fixed to the main rebar using a U-bolt ■ Used by rotating 45° for each of the four positions in one layer *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely non-welded fitting 'GT Hook Type A'

Completely non-welded fitting 'GT Hook Type A'

Sufficient strength without a double structure using assembly ribs on the inside! Bolt tightening type.

The "GT Hook Type A" is a completely weld-free fitting for fixing the main rebar and reinforcement frame (flat bar). In the GT method, it is recommended to use flat bars as appropriate instead of assembly rebar. It demonstrates sufficient strength without a double structure using assembly rebar on the inside. 【Features】 ■ Bolt tightening ■ Fitting for fixing the main rebar and reinforcement frame ■ Used on the lower side of the cylinder where tools are difficult to access ■ Used around the reinforcement frame and on all main rebar except BW *For more details, please refer to the PDF materials or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely Weldless Fitting 'GT Hook B Type'

Completely Weldless Fitting 'GT Hook B Type'

Used for bolt tightening work from the outside of the cylinder! Non-welded fittings for external bolt tightening.

The "GT Hook Type B" is a completely weld-free fixture for fixing the main rebar and reinforcement frame (flat bar). In the GT method, it is recommended to use flat bars as needed instead of assembly rebar. It demonstrates sufficient strength without a double structure using assembly rebar on the inside. 【Features】 ■ External bolt tightening ■ Fixture for fixing main rebar and reinforcement frame ■ Used for the part where bolt tightening work is done from the outside of the cylinder ■ Used around the reinforcement frame and on all main rebar except BW *For more details, please refer to the PDF materials or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely non-welded fitting "GT Hook BW Type"

Completely non-welded fitting "GT Hook BW Type"

Enhance the twisting strength of the rebar cage and prevent buckling and deformation! Main reinforcement and support frame fixing hardware.

The "GT Hook BW Type" is a completely weld-free fixture for fixing main rebar and reinforcement frames (flat bars). By appropriately using the reinforcement frame (flat bar) and employing anti-twist reinforcement bars, it enhances the twisting strength of the rebar cage and prevents buckling and deformation. 【Features】 ■ Fixes anti-twist reinforcement bars ■ Fixes main rebar and reinforcement bars ■ Used in approximately 4 locations around the circumference ■ Enhances the twisting strength of the rebar cage and prevents buckling and deformation *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely non-welded fitting 'GT Hook FJ Type'

Completely non-welded fitting 'GT Hook FJ Type'

Fixing the overlapping parts of the conventional hoop reinforcement together with the main reinforcement! Ensuring higher strength.

The "GT Hook FJ Type" is a fitting designed to prevent the welding detachment and misalignment of conventional hoop bars. It fixes only the overlapping part of the hoop bar joint, but by securing it together with the main bars, it ensures greater strength. 【Features】 ■ Fixes the overlapping part of the conventional hoop bars together with the main bars ■ Prevents welding detachment and misalignment ■ Uses two units per conventional hoop bar joint *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely non-welded fittings "GT Hook SF/FI Type"

Completely non-welded fittings "GT Hook SF/FI Type"

By securely fixing the lattice bars with high precision, the effectiveness of deformation prevention is enhanced!

The "GT Hook SF/FI Type" is a non-welded fitting for securing lattice bars. It securely fastens the main bars and hoop bars, and then fixes the hoop bars to the lattice bars. This method ensures that the strength is not affected by any misalignment between the main bars and the lattice bars, allowing for a more reliable fixation. By securing the lattice bars with high precision, the effectiveness in preventing deformation is enhanced. 【Features】 ■ Securely fastens the main bars and hoop bars, and then fixes the hoop bars to the lattice bars ■ Allows for a more reliable fixation without being affected by strength variations ■ Uses SF at approximately four points on the main bars and hoop bars ■ Uses FI at approximately four points on the hoop bars and lattice bars *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely Weldless Fitting 'GT Hook SJ Type'

Completely Weldless Fitting 'GT Hook SJ Type'

At the connection of the iron cage, the main bars are joined and fixed! This eliminates displacement and enhances strength.

The "GT Hook SJ Type" is a non-welded fitting for overlapping main bars. By bundling the overlapping parts of the main bars and the hoop bars, it eliminates displacement and enhances strength. Compared to conventional joint fittings, sufficient strength can be secured with half the number of pieces. 【Features】 ■ Bundles the overlapping parts of the main bars and the hoop bars to eliminate displacement and increase strength ■ Joins and secures main bars at the connection points of the iron cage ■ Used in two places for one main bar joint, skipping one bar *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-welded fitting "GT Hook"

Non-welded fitting "GT Hook"

Compatible with D10 to D51 according to the site! Introducing options for main rebar lap splices and for fixing common girder bars.

We would like to introduce our non-welded fittings, the 'GT Hook.' By combining anti-loosening nuts and custom wire, it maintains an accurate shape. It can be used not only for cast-in-place piles but also in civil engineering and construction structural work. Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ■ Type A: For fixing main rebar × reinforcement frame (FB) ■ Type B: For fixing main rebar × reinforcement frame (FB) ■ Type BW: For fixing main rebar × reinforcement frame (FB) × anti-twist reinforcement bar ■ Type SJ: For overlapping main rebar ■ Type FJ: For conventional band rebar overlapping joints *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.